I&C Field Troubleshooting Engineer (J78458415) Finland
The I&C Field Troubleshooting Engineer will be in charge of following tasks identified with regard to the phases of the project:
1. Preparation:
• Interface with the development and the engineering departments from a technical standpoint on I&C Field devices if Spare Parts or Test Equipment are needed
• Participation in the review of the I&C Field Troubleshooting Log File
• Attend to Pre-Job Briefing prior to I&C Field Tests execution
2. Execution:
• Support I&C and Process tests execution for unexpected event or non-conformity analysis
• Analyze and select the troubleshooting actions while limiting the impact on running commissioning activities, with the support of engineering databases and master documentation
• Plan troubleshooting activities with corresponding I&C and Process commissioning engineering to evaluate and limit the impact on I&C/Process systems behavior and availability
• Preparation of Work Order (WO) requests associated to the troubleshooting activity to be performed on I&C Field Devices – if any
• Replacement of damaged components
• Support the I&C Field Commissioning Team during re-tests after trouble is solved – if needed
• Collect design documentation at the applicable reference configuration (e.g. data sheets, circuit diagrams, P&IDs, 3D drawings) prior to start the troubleshooting
3. Control and monitoring:
• Follow up of Trouble events on a day to day sequence.
• Update of Troubleshooting Log File on day to day sequence with detail information what was the problem, what was exactly done etc. after the problem is solved or identified
• Follow up of needed Spare part orders with the responsible person inside the IMO I&C Maintenance Branch.
4. Closure:
The completion of the commissioning activities related to the entrusted I&C system is sanctioned by following events:
• Provide the as-built configuration to the Engineering department for the Configuration documentation update if needed due to red-marks.
• Support to the closure of all I&C system open points assigned to I&C Maintenance Branch
• Inform the I&C Field Shift Leaders that trouble event have been solved and re-testing can start.
General and technical background expected:
Engineer degree or highly skilled Technician degree in automation field
Experience in sensor calibration
Experience in commissioning activities on sensors, actuators, switches and similar field devices
EPR knowledge would be a plus